Why Does My Rolls Royce Phantom Key Fob Not Work?
The Rolls-Royce Phantom conveys wealth and prestige. The large grille with waterfalls and classic upright dimensions are instantly recognized. It is also among the most expensive automobiles around the globe.
A rolls royce phantom fob could stop working for various reasons. The most common reason is a dead coin battery however it could also be caused by water damage or receiver module issues.
Battery
The most common reason for the Rolls-Royce Phantom key fob not functioning is the dead battery within. However it is crucial to note that the key fob also may stop working due to a variety of other causes, such as damaged buttons, water damage, bad battery contact, signal interference, or even unpaired keys requiring reprogramming. Contact a locksmith if your key fob isn't functioning. A locksmith can pinpoint the problem quickly and provide an immediate solution.
It is crucial to protect the battery from moisture and dirt in order to ensure it's functioning. This is why it is recommended to always make use of a waterproof key fob case when you travel. It is also advisable to remove battery from key fob prior cleaning or washing it. Furthermore, the chip inside the key fob is very sensitive to water and should never be exposed to soapy or salty water. If the key fob is prone to exposure to water, you can use isopropyl alcohol or electronic cleaner to protect against water damage.
The battery pack of the Phantom EE is a unique power system that has numerous innovations. This sets it apart from other luxury cars powered by traditional power systems. For example the inclusion of the "power reserve dial" is now available on the dashboard, which conveys the status of the car's power supply to the driver. This is a new design feature which is intended to challenge the conventional car-related concepts and showcase the potential of alternative drive-train technology.
One of the major advantages of this electric powertrain is that it permits charging to be re-charged without the need for a physical connection between the car and the charging station. This is done by using induction. Induction is the transfer of power across two surfaces which include an induction mat placed on the ground, and a power transfer unit inside the battery pack.
The process of recharging takes place in two stages, and has a a capacity of 13.5kW per phase and a total capacity of 71kWh. It is the biggest battery for a car's passenger in the world. The Phantom EE also comes with three separate chargers that can be used for single-phase and three-phase charging and also regenerative braking.
Contacts
If your Rolls Royce Phantom key fob stopped working, it might be due to an unresponsive battery or worn buttons or other reasons. Fortunately, this problem is usually easy to fix. You can also try reprogramming the key fob or replacing the battery with 12 volts. If via persists, the receiver module might be defective. The receiver module is used by the remote keyless system to communicate with other electronic components onboard by radio signals. If the receiver module is faulty, it will cease to communicate with the key fob or other electronic components onboard.
If you're experiencing issues with your key fob, it is important to ensure that the battery contacts are dry and clean. The retaining clips made of metal hold the button cell in place and complete the circuit, and they are easily damaged by dirty or wet hands. If the battery is degraded you must replace it with a brand new one that is the same size and voltage. If you replace the battery, make sure to clean the surfaces of contact with rubbing alcohol or electronic cleaner before reassembling the key fob.
The key fob on the Rolls Royce Phantom is equipped with an electronic chip that transmits signals to the remote keyless system receiver module. The receiver module converts signals into commands that the car is able to understand. This is how the car knows you want to unlock doors or retract the "flying woman" ornament on the hood grille.
If the key fob has been exposed to water, it should be removed immediately from the vehicle. Cleanse the electronic chip with electronic cleaner or isopropyl. If you don't do this, the chip may be fried.
Water damage
The key fob is constructed with rubber seals that protect the electronic chip inside from being exposed to water. This makes it immune to light rain and splashes but not the type of deep water immersion that could occur when you drop your key in a puddle or drop it in the ocean. If the fob gets wet, it's likely that the chip could be fried and you will need to get a new one.
Even if you didn't drop your key fob in the water, but it's affected by a wet dog washing machine, or soapy handwashing, don't be discouraged because your roll-royce phantom key fob might still be salvageable. All you have to do is follow a few easy steps and you could save yourself the cost of purchasing the new key.
First, you must dismantle the key fob and thoroughly dry it. If you can, remove the battery and make use of compressed air to eliminate any excess moisture. After you've done this, leave it to dry for a few days before you attempt to use it again.
If your key fob is susceptible to getting wet, it's a good idea buy a waterproof case that can shield it from damage. You should also keep a spare fob in hand to avoid waiting for it to dry.
In some instances it is possible that your Rolls Royce Phantom key fob might stop working due to interference or the battery is dead. This issue is typically caused by objects, bad weather conditions, or transmitters that operate on the same frequency band as your remote.
The best way to prevent this problem is to keep your key fob away from these sources of interference. If you can't avoid these sources of interference, you could try moving your car to a different location or reprogramming your remote. If you can't fix the issue yourself then it's recommended to consult an expert technician. They can identify the issue and determine if the issue is an electrical or mechanical fault.
Reprogramming
The key fob inside your Rolls Royce Phantom is an essential component of your vehicle's security system. It transmits commands from the key fob to the receiver module that transmits the commands to the central locking mechanism of the vehicle. If the key fob ceases to function and is not working, it can be a frustrating and expensive problem. There are a few easy things you can try to get your key fob working again.
Check if the coin battery in the key fob is dead. This is the most common reason for Phantom key fobs that are not locking or unlocking. There are typically signs of deterioration, like the decrease in range. Replace the battery by one of a fresh model with the same size, voltage, and specifications. Also, make sure the metal retaining clips that hold the battery in place aren't loosened.
Water damage is a different cause. The key fob is equipped with rubber seals to prevent water from getting to the chip inside, but if it gets soaked in soapy or salty water, the seals could fail. If this happens, you should take the battery out and clean it with isopropyl alcohol or an electronic cleaner. Dry the battery thoroughly before putting it back into the fob.
If the key fob does not work, it could be a sign that the receiver module has suffered a malfunction. The best way to diagnose this is to connect an diagnostic scanner to the OBD port under the dashboard of your Phantom. The scanner will then request for certain information regarding your car, such as the year model, year, and type. You'll also need to enter the code for your key fob.
Another reason could be signal interference. This could be caused by objects, weather conditions or transmitters operating at the same frequency. The remote control will function when you're near the Phantom, but it won't unlock or lock from an extended distance. You can solve this issue by removing any objects that might block the signal, or moving the Phantom away from the transmitters.